| Warranty: | 1 Year |
|---|---|
| Weighing: | >300kg |
| Accuracy: | 0.1g, 1/30000 |
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier SC315A1-S Double-Side Big LED Display platform scale indicator floor scale weighing indicator
Model: SC315A1X-S
Plastic housing
6-digit 20.2mm doule-sided red LED
Dimensions:256×165×170mm
Applications:Electronic platform scale, weighing scale, etc.
PACKAGE
Quantity:12 PCS per Carton
Dimension:42x60x60cm
Weight:About 23kg
SC315A1-S Double-Side Big LED Display platform scale indicator floor scale weighing indicator
SC315A1-S Double-Side Big LED Display platform scale indicator floor scale weighing indicator
| Function | Optional |
| 1, Operating temperature: 0ºC to 40ºC | RS485 serial interface |
| 2, Storage temperature: -25ºC to 55ºC | Mechanical scale |
| 3, Relative humidity:≤ 85% non-condensing | Wireless connection |
| 4, 30 hours of full charge battery operation | Blue tooth connection |
| 5, Drive up 4X350Ω or 8X700Ω load cell | |
| 6, Manual/Automatic accumulation | |
| 7, Programmable zero tracking | |
| 8, Programmable digital filter | |
| 9, Selectable kg and lb | |
| 10, RS-232 serial interface | |
| 11, Accuracy can be increased ten times | |
| 12, Animal weighing | |
| 13, Hold function | |
| 14, Counting function | |
| 15, Printer |
SC315A1-S Double-Side Big LED Display platform scale indicator floor scale weighing indicator
Note:
Below are single point loadcell sensor series, you can find other similar aluminum slloy loadcell sensor in our web, if you cannot find it or you have special requirement, please send us e-mail snc at sensor-con doc com with model name or the special requirement you may have. We will come up with a solution for all of your snigle beam loadcell sensor requirement.
Load cells should be selected after considering the following points.
1.1. Loading Conditions
Determine the loading conditions of the load cell (tension, compression, bending, etc.) that best suit the
kind of weighing you would like to perform.
1.2. Rated Capacity
The following points should be considered when selecting a rated capacity.
2.1. Display of the Required Resolution
When the minimum weighing value (1 digit) is small compared to the rated capacity, the load cell
output per digit should be above the input sensitivity of the indicator.
Force applied onto the weighing pan is converted into electrical signals by the load cell and output to
the indicator.
2.2. The Strength of the Load Cells
1) Platform scales
When making a platform scale using a single-point load cell, it is acceptable for the
weighing capacity of the scale to be equal to the rated capacity of the load cell. For instance, if we want
to make a scale with a capacity of 100 kg, we can use a load cell whose rated capacity is 100 kg.
However, the initial (tare) load must not exceed the safe tare limit (maximum dead weight) of the load
cell. If the initial load is very large, the rated capacity + the safe tare limit is treated as the rated
capacity.
2) Industrial hopper scales, etc.
The rated capacity of a load cell for purposes other than platform scales can be determined as follows.
However, the rated capacity must be sufficiently large if overloading or transverse loading may occur
2.3. Accuracy of Measurement
Load cell specifications must be checked to ensure that they satisfy the required accuracy of
measurement. The factors that influence the accuracy are nonlinearity, hysteresis error, repeatability,
and temperature effects on zero balance and span. Recently, it is more common to express nonlinearity,
hysteresis error, and repeatability together as the combined error.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}