0-5V 4-20mA Loadcell Strain Gauge Dual Amplifier

• Logo Printing: Without Logo Printing
• Installation Type: Panel Mounting
• Display Digits: 4 digits
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: PY-V-SP strain gauge amplifier
• Display Type: LED
• Accuracy Grade: 0.1G
• IP Rating: IP65
• Certification: RoHS
• Customized: Customized
• Item: Dual Amplifier
• Working Temp.: -10--70 Degree
• Load Cell Connection: 1- 4 Sensors
• Size: 145/115X80X46mm
• Network: 4G
• Voltage: 10VDC
• Model: Strain Gauge Amplifier
• Material: Plastic or Aluminum Alloy Amplifier
• Output Signal: 0-5V, 0-10V, 4-20mA (Optional)
• Working Temperature: -20~80 ºC
• Display: Metal Case Support
• Specification: Custom size
• Trademark: SNC
• Origin: Guangdong, China
• HS Code: 8533211000
• Package Size: 20.00cm * 10.00cm * 10.00cm
• Package Gross Weight: 0.500kg

Product Description

0-5V 4-20mA Loadcell Strain Gauge Dual Amplifier

Voltage: 10V

 

Output signal: 0-5V, 0-10V, 4-20mA (Optional)

 

Working temperature: -20~80

 

Working environment Humidity: 10%RH-90%RH

 

Precision: more than 0.1%F.S

 

0-5V 4-20mA Loadcell Strain Gauge Dual Amplifier

 

 

 

 

 

 

Load cell amplifier in aluminum alloy case / housing, display support

 

 

 

 

 

 

0-5V 4-20mA Loadcell Strain Gauge Dual Amplifier

 

 

 

 

 

 

Input signal Cable connection mark	S (IN) +	S (IN) -		V (8V) -		V (GND) -		GND
Connection definition	Signal +	Signal -		Excitation voltage+		Excitation voltage -		Shield
Input signal Cable connection mark	24V +		GND		I out		GND
Connection definition	Power supply+		Power supply -		Output signal		Shield

 

 

 

Note: Default setting of Excitation voltage is 10VDC, customer can adjust it as needed within 5V-15V.

 

 

 

Calibration:

 

First, with the whole system UNLOADED, adjust "ZERO" potentiometer to adjust the zero offset.

 

Measure the output voltage or current of signal output with multimeter, make sure the value is as close to

 

zero as possible. Otherwise zero variation will get bigger when we change gain factor.

 

1, Gain adjustment

 

Add known load to the system (recommend: 80%~100% of Full Scale), then calculate value of the

 

output voltage or current according to the ratio between loaded weight and the maximum capacity.

 

Get output value using a multimeter. Adjust amplifier gain by turning "FULL SCALE" potentiometer.

 

2, Review

 

Unload the system and measure zero output. Make sure that it is as close as possible to zero.

 

Add known load, check whether the output voltage or current is amplified as needed you wanted or not.

 

 If not, repeat steps 1 and 2.

 

 

(Note: this section is for standard sensor amplifier parameters. For special requirements, please

 

contact our sales department)

 

 

 

Related Products

Note:

Below are weighing indicator / big display series, you can find other indicators in our web,  if you cannot find it or you have special requirement, please send us e-mail snc at sensor-con doc com with model name or the special requirement you may have. We will come up with a solution for all of your indicator requirement.

 

 

 

FAQ

1. How to place an order?                                                                                                                                                                     

Please provide us more details of what you want, such as: application, measurement range, output, accuracy, thread type, electric connector and other related parameters. 

2. Does SNC offer any discount?                                                                                                                                                         

Yes, if you buy large QTY, please contact us, we will give you a big discount.

3. What terms of payment are available?                                                                                                                                             

We accept T/T, L/C, Trade assurance, Western Union, Paypal, etc.

4.When will you arrange the production?                                                                                                                                            

We will arrange the production immediately after receiving your payment.

5. How do you ensure good product quality?                                                                                                                                      

We have a complete quality control system, all of our products are fully checked by IQC, OQC departments before shipping to our clients

6. Do you have warranty ?                                                                                                                                                                       

Yes, we provide 1 year warranty for most of our products.

 

Packaging & Shipping

Sensor and Control weighing components/ products packaging pictures and warehouse.